Bevvy - Adirondack Chair Beverage Holder
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
My Adirondack chair arms are sloped so drinks slipped off if you set them there, so I created this to hold beverages…
- Ocena
- 0 / 5
- Polubienia
- 13
- Pobrania
- 29
- Wydruki
- 0
- Wyświetlenia
- 496
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Outdoor & Garden
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
My Adirondack chair arms are sloped so drinks slipped off if you set them there, so I created this to hold beverages on the arms.
(My chairs: https://www.amazon.com/gp/product/B00A7KJG58)
I specifically designed this so that it can be printed on-end with no supports (max angle 45 degrees), but it did turn out to need rafts with one filament I used, so I always used it.
Additionally, I could print 4 of these at a time on my printer (just barely w/ the rafts)
Print Settings
Printer Brand:
Printer:
Rafts:
Yes
Supports:
No
Resolution:
.2mm
Infill:
15%
Filament:
Atomic Filament PETG
Emerald Green
Notes:
I used 2 raft layers in PrusaSlicer.
How I Designed This
Used Autodesk Fusion 360 (I'm a newb). I included the file in case you wanted to modify it for your chairs