Scotty to 1" Ball Mount to Hold My IPilot Link Holder
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Added a 1" Ball Mount to the top for RAM style Arms
- Ocena
- 5 / 5
- Polubienia
- 13
- Pobrania
- 59
- Wydruki
- 0
- Wyświetlenia
- 368
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Outdoor Sports
- Licencja
- Creative Commons — Public Domain
Fit well into a purchased Holder. Might be slightly looser fit to slide vertically then the rod holder but snug and no play when seated.
Printed PETG, 25% infill and 0.2mm layer height
Printed to use as a Base Ball to attach My IPilot Holder, But could be used for anything 1" Ball Mount.
Edit: Revision Made
Added an M5 brass nut to the top and ran an M5x0.8x55m Socket Head Cap Screw though the center. This is the first time I made a 1" ball mount without an M5 in it and it broke first time on the water. With the M5 in it now it shouldnt be an issue again.