El Pulpo Micronico
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A miniature tribute to the great 'El Pulpo Mechanico' art car. Created for Balsa Man 2024
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 14
- Wydruki
- 0
- Wyświetlenia
- 106
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Action Figures & Statues
- Licencja
- Creative Commons — Attribution — Share Alike
This little octopus waves his 8 little arms and flashes his 8 miniature eyes. His structure and body were made using 3d printed parts, a small motor, some LEDs, and a Smartibot robot controller to allow him to be remotely controlled.
Video of the Polpo in action: https://www.instagram.com/p/C_XcWaNN3Iv/
3d printed parts: See 3d models below. I printed the body, base, and head on an FDM printer, and the legs on a SLA printer. This gave them a rounder shape without extra effort.
Hardware / other bits:
- 1pc Smartibot robot controller
- 1pc DC gear motor
- 2pc LED assemblies: made freeform, using leftover white 3528 LEDs, soldered in series with a 480ohm resistor, and connected to a length of wire.
- Various M3 hardware. This model makes extensive use of M3, 4mm long ‘heat set nuts'. I was improvising so I didn't keep track of the screw sizes that I used, so it would be best to have some handfuls of different lengths, primarily in the 10-20mm length.
Assembly: Print all of the parts, paint them, then screw everything together :-). Some tips are that the arms needed a lot of sanding and filing to get them to fit well in the base.