1 / 1
Holder for curtain rod with fixing screw printed with wood filament
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Original part was broken, so I have designed an improved holder with a fixing screw to ensure rod is certainly fixed.
- Ocena
- 0 / 5
- Polubienia
- 4
- Pobrania
- 21
- Wydruki
- 0
- Wyświetlenia
- 98
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Home Decor
- Licencja
- Creative Commons — Attribution — Noncommercial
The holder is specially designed for roof windows to prevent the curtain rod from falling out by using a set screw
Part list:
- printed part | quantity: 2
- countersunk screw ⌀3x12 (for wood) | quantity: 2
- countersunk screw ⌀3x30 (for wood) | quantity: 2
- cylinder head screw M3x25 | quantity: 2
- hexagon nut M3 | quantity: 2
Print instruction:
- material: wood filament, PETG, PLA
- supports: partial organic support
- layer height: 0,2mm or 0,3mm
- nozzle diameter: 0,4mm or 0,6mm
- brim: not required
- enclosure: not required