Skadis wire brush holder (simplified)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A simplified version of Clemi's wire brush holder for Skadis.
- Ocena
- 5 / 5
- Polubienia
- 2
- Pobrania
- 68
- Wydruki
- 4
- Wyświetlenia
- 165
- Oceny
- 2
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Organizers
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
The simple, yet quite elegant, straight forward design of the wire brush holder by Clemi pretty much convinced me. However, I consider the T-Nut approach overdone for this holder which is otherwise simple. So I replaced the T-Nut fixture with a simple hook, which is the same kind of hook as in my other Skadis models.
The resulting mesh has slight imperfections. However, they are on a too small scale to affect the printed result.
The holder fits my wire brush very well on its most narrow spot, which is a little less than 11 mm wide. Measured with a caliper, the holder provides a 12 mm wide space.
Update: I got the Prusa nozzle wire brush and this holder also fits it.