Dj skeleton wallart
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Simple but very cool design of a skeleton mixing deck
- Ocena
- 0 / 5
- Polubienia
- 5
- Pobrania
- 30
- Wydruki
- 0
- Wyświetlenia
- 117
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Wall-mounted
- Licencja
- Standard Digital File License
Suitable for wallart. I sliced the model and made it to 9 pieces that fits on the plate of bambu x1 carbon ( build plate 256x256mm). Size of my sliced version and on the photos is 60cm lenght and 70 cm height. We put it on the wall using double side tape. I upload the original version so you can slice it however you want.
If you are going to slice model on your own be carefull for the thicknes of some parts because it can later break if its no thick enough.
I suggest you scale down every part the same to fit your build plate if you are not using the same plate.
I used 380 g pla black material for the whole print and about 20 hours.