1 / 1
Dog Glasses Holder — zdjęcie 1

Dog Glasses Holder

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

A dog, that holds your glasses.

Ocena
4,889 / 5
Polubienia
335
Pobrania
1302
Wydruki
12
Wyświetlenia
8705
Oceny
9

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Living Room
Licencja
GNU General Public License v3.0

Needed parts:

  • M4 Tap
  • 2x M4 Screws, 8..15mm acceptable

Instructions

  1. Print as oriented, no supports necessary
  2. Remove sacrificial hole pattern where the nose part will mount
  3. Tap the hole in the Nose and the Body part with an M4 Tap, but make sure not to go to deep, as the chips will accumulate in the holes. The hole in the nose is 20mm deep, and the hole in the body is 25mm deep, so mark your taps.
  4. Assemble

If the recipient of the gift does not have a good sense of humor, cover up the screw mounting the feet with a 8mm sized disk from your slicer.