1 / 12
Spoon holder for yoghurt/muesli cup to go
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
I designed and built this spoon holder for my children's yoghurt/muesli cups.
- Ocena
- 0 / 5
- Polubienia
- 2
- Pobrania
- 16
- Wydruki
- 0
- Wyświetlenia
- 195
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Kitchen
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
I designed and built this spoon holder for my children's yoghurt/muesli cups.
In my case, I used 300ml Mepal cups.
Affiliate link:
Mepal 300 ml + 120 ml - Nordic Black
The holder is sturdy and can be removed from the cup. Both the spoon holder itself and the holding ring on the cup.
Material
- The holding ring on the cup is made of TPU and is therefore elastic.
- The spoon holder itself can be made from PLA/PETG.
The spoon holder has a TPU fastening strap.
Cleaning
Because the holder can be removed and opened wide with the TPU fastener, it is also easy to clean.
Assembling
- The two housing parts made of PLA/PETG do not require any support material. They must be glued together. I used a 2k epoxy resin adhesive. Superglue might also work.
- The TPU fastening strap is glued to the lower part of the housing with e.g. superglue/cyanoacrylate.
Glue examples (Affiliate links)
STEP Files also included