HSI Press
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Small, cheap heat set insert press for everybody.
- Ocena
- 0 / 5
- Polubienia
- 27
- Pobrania
- 93
- Wydruki
- 0
- Wyświetlenia
- 684
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Tools
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Heat set insert press for everybody!
Hey guys, I created this cute press as an alternative to the aluminum profile presses.
Feel free to remix the press and adapt it to your needs. You can find more information and a link to onshape below, but for now, here's what you need.
You can use it for objects up to 6cm. For larger ones, remove the inlay.
Parts list
| Name | Quantity | Buy Link (DE) |
|---|---|---|
| Heat Set Insert M2 (4x4mm) | 7 | Aliexpress |
| Cylinder Screw M2x6mm | 7 | Aliexpress |
| Cylinder Screw M2x20mm | 4 | Aliexpress |
| Heat Set Insert M3 (5x4mm) | 14 | Aliexpress |
| Nut M3 | 2 | Aliexpress |
| Cylinder Screw M3x8mm | 2 | Aliexpress |
| Cylinder Screw M3x10mm | 4 | Aliexpress |
| Cylinder Screw M3x16mm | 2 | Aliexpress |
| Cylinder Screw M3x20mm | 4 | Aliexpress |
| Cylinder Screw M3x30mm | 4 | Aliexpress |
| Nut M8 | 3 | Aliexpress |
| Washer M8 | 2 | Aliexpress |
| Cylinder Screw M8x30mm | 1 | Aliexpress |
| Rod M8x195mm | 1 | Amazon |
| Bearing 608zz | 1 | Aliexpress |
| Retractable key chain round 40mm | 1 | Aliexpress |
| Magnets 6x2mm | 8 | Aliexpress |
| Steel BBs ca.4mm | a few | Amazon |
| Soldering iron w/ ca. Ø 20mm handle | 1 | Aliexpress |
I use a soldering iron with a 20mm handle, but if you have other dimensions, remix it or let me know in the comments. I will add sizes in time. ;)
Printing parts list
| Name | Quantity |
|---|---|
| Bar | 1 |
| Head | 1 |
| Holder | 1 |
| Back Cover | 1 |
| Base | 1 |
| Base inlay | 1 |
| 608zz ring | 1 |
Printing instructions
- General
- Material: PLA or PETG. I use PLA, because i planed the M8 rod for stabilisation.
- Base + Base inlay
- Wall loops: min. 4
- Bottom Shell Layers: 5
- Infill: 5-7%
- Muster: grid
- Special: Make a stop point in the gcode a 11 mm height and add Steel BBs! Continue printing.
- Other Parts
- Infill: 10-15%
Assembly instructions
Watch PDF.
Remix it!
For all those who want to remix, here is the onshape link: Heat Set Insert Press
I have to say, however, that it was my first attempt with onshape and I was more interested in getting to know the GUI than in keeping the project tidy.
Therefore, a small preview of the next updates, if the project goes down well with you.
Coming Updates
- Change wrong Configuration variables in Variable Studio
- Make it more parametric safe
- remove bugs, if somebody cry
Changelog:
- 22.09.24 - V1.0:
- Release Version