CRF300L - Front brake line guide spacer
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Spacer that moves front brake line on your CRF300L further away, so you can see LCD better.
- Ocena
- 0 / 5
- Polubienia
- 8
- Pobrania
- 82
- Wydruki
- 0
- Wyświetlenia
- 383
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Automotive
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
If the brake line on your CRF300L gets in the way and you can't see the whole LCD, you can print this 12mm spacer, which will move brake line further away from you.
12mm spacer is maximum you can use, otherwise your brake line will be rubbing the blinker mount and you don't want to damage your brake lines, but if would like to experiment you can download FreeCAD source file and edit it to your liking.
How to print:
Layer height: 0.2mm
Infill: 15% Gyroid
Perimeters: min. 3
Supports: On build plate only
Material: PETG, or other UV stable material
What you will need for installation:
1x 28mm M6 hex-head screw
1x 14mm M6 washer
8mm spanner (to remove original screw)
10mm spanner (screw you will buy will probably have 10mm head)
Blue thread lock glue