SV08 Cable chain relocator Update
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
sv08
- Ocena
- 5 / 5
- Polubienia
- 15
- Pobrania
- 166
- Wydruki
- 1
- Wyświetlenia
- 857
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Printer Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Share Alike
New version. so for me the hole was to far away and made the cable to get to streatched so i made some holes to find where the stepper motor cable is still reaching the stepper and well now lesser tension
So first things first hi and im a bit dumb to upload the model with the holes because i have no clue xD. so i upload the whole projekt file from orca slicer so you just slice it and the holes should be there ^^. dont worry you can import the projekt and switch to your printer and dont get surprised i use from the (USER:Gohan) the sv08 settings ,,kinda cause i always play with the settings,, and i must add something i didnt printed it with the sv08 cause it was disasambled while i relized that the cable is to short so i printed it with the sv06 and dont ask me why it made the projekt for my sv08 cause i dont have a clue why cause the sv06 printer was selected. so yea hope it works for you guys and i added 2 holes one original and one for the extend arm. for me the stepper cable was to short.
file works only in orca slicer as far as i know
and the holes do not apear in cura!!