CNC 3018 Spindle Mount
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Simple system using 6 M4 nuts and bolts to affix a shop vac hose and other accesories to the spindle mount.
- Ocena
- 0 / 5
- Polubienia
- 10
- Pobrania
- 75
- Wydruki
- 0
- Wyświetlenia
- 751
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Mechanical Parts
- Licencja
- Creative Commons — Public Domain
I couldn't find a model for my unknown lineage CNC 3018 that would fit onto the spindle assembly and that could accept my Craftsman shop vac hose so I created this. It is designed to fit on a CNC 3018 with a 42mm diameter spindle motor and a spindle mount that is approx. 58mm wide and for a roughly 31-32mm diameter shop vac hose. Here is the OnShape link if you'd like to make modifications to fit your own CNC.
Parts list:
- 2 x 3018_Accessory_Mount_M4_v2
- 2 x 3018_Accessory_Mount_M4_Blank_v0
- 1 x 3018_Accessory_Mount_M4_Vac_45deg_V1
- 6 x M4*12mm bolts
- 6 x M4*3mm nuts
Assembly:
- Insert nuts into 3018_Accessory_Mount_M4_v2.
- Hold one 3018_Accessory_Mount_M4_v2 on the top and the other on the bottom of the spindle. You may have to work this a little bit, I intentionally made it a tight fit.
- Attach the 3018_Accessory_Mount_M4_Blank_v0s and 3018_Accessory_Mount_M4_Vac_45deg_V1 in whatever configuration fits your setup best.
I also used this model to generate a nozzle which fit best for my setup.