Burger Press - Three sizes included in one
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A burger press for making standard, quarter pounder and half pounder sized burgers.
- Ocena
- 0 / 5
- Polubienia
- 15
- Pobrania
- 94
- Wydruki
- 0
- Wyświetlenia
- 427
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Kitchen
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
This is a burger press for making your own beefburgers, hamburgers, sausage burgers, etc.
There are 3 sizes included. Standard (1/8 pounder), ¼ pounder and ½ pounder which are achievable by using different sized base plates (all marked on the bottom).
I have included a detailed 3-page instruction sheet to show you how to put it together and use once printed.
There are 2 types of sides - One with lugs that guide the base plate to be the optimized way round and sides with no lugs, so that it isn't as fiddly trying to get the base plate in correctly. The version without lugs cannot guarantee a burger that is equally spaced in thickness, as every angle is different. I suggest using the optimized version first and if you find it too hard to use, then use the lug free version instead. You will only need to re-print the ‘sides’ as everything else uses the same parts for either version.
There is also an alternative ‘Handle (Ergonimic)’ which has a rounded top instead of a flat top. This is a matter of personal choice as they both work the same, but one may be more comfortable than the other.
Do you want to be able to sell any or ALL of my prints shown here on Printables.com?
If so, then click on the 'buy me a coffee' link below, (or click here) and join one of my memberships. This gives you the option of a monthly, yearly or lifetime commercial license, along with a certificate and loyalty bonus models (both commercial and non-commercial). The non-commercial items are 3rd party models that may also interest you, all in one place.
The lifetime membership offers you unique commercial items not available to anyone else as well as all of the loyalty bonus models.
Please click the LIKE (Heart) Button if you like my models. If you REALLY like them, then please also buy me a coffee at the bottom of the page. Thank you.
Printing Instructions:
I printed these on my Creality CR-6 SE printer with Cura slicer 5.8.1 (Other printers/slicers can be used).
Material: PLA
Manufacturer: Prima Value
Colour: Light Grey
Resolution: 0.2
Nozzle: 0.4mm
Print Speed: 80mm/s (First layer @ 50mm/s)
Nozzle Temperature: 210 Degrees
Bed Temperature: 65 Degrees
Infill: 20%
Supports: No
Skirt: Yes / Optional
Brim: No / Optional
Raft: No / Optional
Enjoy.
https://www.buymeacoffee.com/tigertone
