Hex box (stackable, snap-joint, vase mode)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
hexagonal container. stackable, snap-join, vase mode hexagonal box
- Ocena
- 5 / 5
- Polubienia
- 333
- Pobrania
- 844
- Wydruki
- 7
- Wyświetlenia
- 3123
- Oceny
- 5
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Organizers
- Licencja
- Creative Commons — Attribution — Share Alike
About
This is simple hexagonal container. it has snap-fit connections so all the containers can be joined together. top part has narrowed lip so the containers can be stacked one on another.
How to print
Just turn on vase/spiral mode in your slicer and increase line width for external perimeter (at least to 0.6mm but 0.8mm should result in stronger container). It's good idea to also increase the bottom thickness to 1mm.
I prefer PETG for this model as it tends to have better between-layer connection and also is less brittle than PLA. ABS should be also OK. If you want the container to be watertight - consider increasinf flow rate by a percent or two - just to be safe.
Have a nice printing :)