Dosing cup holder for DF54 adapted from DF64
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
For the dosing cup to be closer to the chute and reduce the amount of coffee spread all over.
- Ocena
- 5 / 5
- Polubienia
- 8
- Pobrania
- 62
- Wydruki
- 1
- Wyświetlenia
- 1423
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Ideas
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
DF54 has two holes, against 1 in DF64, I remixed the original model.
The two holes were fixed a little below the one in the version for DF64 so that the dosing cup can get closer to the chute.
Publishing here for someone to print and test if it works in the DF54. A friend of mine asked to adapt but I don't have the grinder to confirm if the geometry is correct, and he doesn't have a 3d printer. Appreciate any feedback if a DF54 user can print and comment any modification needed.
Print with the holes up so that you don't need supports.
Printed in PLA 0.3 mm height using Orca Slicer.
For a better finishing you can use Fuzzy Skin → Contour → 0.8mm point distance and 0.3 thickness.
Printed at 100 mm/s but didn't test at faster speeds, which may work fine depending on your printer. Mine is a Sovol SV07 Plus.