TUL Medium 8 pen travel holder
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A travel case and display for 8 TUL medium size gel pens.
- Ocena
- 0 / 5
- Polubienia
- 8
- Pobrania
- 25
- Wydruki
- 0
- Wyświetlenia
- 408
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Office
- Licencja
- Creative Commons — Attribution — Noncommercial
I like using TUL pens for my lesson planning, and I color code by grade level. I got tired of rubber bands wearing out/degrading, and wanted something that would both keep the pens together and serve as a way to keep them together and organized on my desk.
I haven't checked if any other pens will fit, just the TUL Medium sized (.07mm? .7mm?) pens. The base is keyed to accept the pocket clip perfectly and keep them oriented in a nice way. the Base also has a little TUL logo on it (for fun). The top, despite the print layers being in the weakest orientation, works great! I literally threw the case around on the ground and it didn't pop apart or even seem to be close to that.
Printed on a Bambu P1P with Creality CR-PETG.
15% infill, .2 layer height on a textured PEI plate. I used a 5mm brim to assist with adhesion. Supports were tree type and “On build plate only”.
The model will likely load with the top being “right-side up”. Flip it over so you don't print any supports in the pen holes.
Let me know if it works with any other pens or any modifications you might want - I have a parametric file so I can modify it fairly easily.