1 / 3
Phone, Ear Buds, and Glasses Holder
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A surface-mounted holder for phone, ear buds, and glasses
- Ocena
- 0 / 5
- Polubienia
- 3
- Pobrania
- 17
- Wydruki
- 0
- Wyświetlenia
- 129
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Portable Devices
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
This is a surface-mountable dock that can hold a phone, ear buds, and glasses. It is modeled to fit a Samsung S22 Ultra+ with case (quite a large phone), general wireless earbuds (Skullcandy in my case, but can fit others), and glasses.
- The main body can be printed in an upright orientation without supports.
- The earbud holder slides into the main body via some dovetails. This piece was printed on its back with organic supports but may not need them.
- Attached with two 3-lb command strips on either side of the main body.
Printed with .4mm nozzle, .2mm layer height, 15% infill