Adeept RaspTank extension
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This parts make your Adeept RaspTank 1cm wider on each side. With that you have enough space for your cables.
- Ocena
- 0 / 5
- Polubienia
- 2
- Pobrania
- 33
- Wydruki
- 0
- Wyświetlenia
- 191
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- RC & Robotics
- Licencja
- Creative Commons — Attribution — Noncommercial
As the original version of the RaspTank is quite tricky to put all cables inside, I designed a wider one. You need to print all 3 parts.
I added to the top plate some metal threads to connect it easier than with the current setup. But you can also add the hole that it works the same way as before in the slicer.
I printed it with a 0,6mm nozzle and 0.3mm layer height. But should also work with 0,4mm and 0,2mm layer height.
10% infill is totally enough, even 5% works.
The red parts on the picture are the new ones.