Replacement shell for psx action replay
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
The original shell design was dumb.
- Ocena
- 0 / 5
- Polubienia
- 4
- Pobrania
- 22
- Wydruki
- 0
- Wyświetlenia
- 154
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Video Games
- Licencja
- Creative Commons — Attribution — Noncommercial
The original shell for my particular psx game code thing seemed to purposely strain when fitting the front to the back. If I were inclined, I'd completely redesign this using the inner board only instead of the original shell as reference. That's why the front in the shown print has cracks after assembly. You'd probably want to spread the top peg sections on the inner front and back so they're ~1mm farther away from the bottom pegs.
This uses the original screws. I should probably also modify this shell to instead use m2.5 or m3 hex countersunk ones instead. freecad file in case you want to improve this.