Bike Garmin Edge mount for 35.5mm stem
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Here is a prototype for a bke Garmin Edge mount for 35.5mm stem. It can be used for rece bikes and is realy robust.
- Ocena
- 0 / 5
- Polubienia
- 7
- Pobrania
- 29
- Wydruki
- 0
- Wyświetlenia
- 372
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Outdoor Sports
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
The 3D printed part is a adapter for the standard Garmin handlebar mount for bike computers. Normally this standard mount is mounted to the handle bar with rubber bands (O-ring).
But I found this is not a sufficient solution because the device is shaking a lot during driving.
You will need:
- 2x M4x35 mm screw (stainless steel, cylinder head)
- 1x M4x 10 mm screw (cone head, need to be flat)
- 3x M4 threaded inserts
Mount description:
1. Get a solder station and mold the M4 threaded inserts into the 3D printed parts (two in bottom one in top)
2. Screw the standard Gramin mount on the top 3D printed part with the small M4x10 mm screw. I additional used some glue to give it more stability.
3. Mount the bottom and top 3D printed parts on you 35.5 mm stem.
Ready to ride!!
UPDATE:
Navi_mount_top_V2 is an experimental version for direct mount of the navigation device. Print the top part with 100% and better with PETG to avoid delamination also use a high temperature (maybe 230°C)
Feel free to ask for further description.
Feel free to print, use and modify the part but do not use it for commercial activities.