Car Headrest Hook Heavy Duty
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A simple hook to hang backpacks, purses, or other items from a car headrest. Heavier duty for heavier items.
- Ocena
- 0 / 5
- Polubienia
- 13
- Pobrania
- 96
- Wydruki
- 0
- Wyświetlenia
- 390
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Automotive
- Licencja
- Creative Commons — Attribution — Noncommercial
This simple hook attaches around one of the support rods of a car headrest to allow backpacks, purses, or other items to be hung from the back of the seat. This hook is designed to be heavier duty than the previous model to be able to support heavier items. The lightweight model can be found here: https://www.printables.com/model/990347-car-headrest-hook.
Print with the opening for the support rod facing up in order to have the best strength.
Make sure to print in a material such as ASA or PETG that works well in the heat and UV exposure of a car. Model shown printed in Matterhackers Pro Series ASA.
Print settings (using ASA):
Nozzle: 0.4mm
Layer Height: 0.2mm
Infill: 15% (grid)
Walls: 3
No supports necessary, but you may need a brim if you have issues with bed adhesion since it is a fairly thin footprint on the bed.