Sculpfun S9 switchbox for Rotary or Bed movement
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Here's a switchbox for changing which item will be used when engraving with rotary or Bed placed workpieces.
- Ocena
- 0 / 5
- Polubienia
- 3
- Pobrania
- 23
- Wydruki
- 0
- Wyświetlenia
- 170
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Ideas
- Licencja
- Creative Commons — Attribution — Noncommercial
This switchbox is designed to make it possible to choose wether you use the rotary roller or the (honeycomb) bed for engranving or cutting.
This way you don't have to everytime pull the plug from the Y motor risking broken cable or steppermotor connection plug.
I included a foolproof fotoset for everyone to see the steps used.
Cable and switch (M402) is from AliExpress, other stuff is from own reserve parts or Arduino parts I have plenty of.
Enjoy building.
PRINTED PARTS:
LAYER 0.2
No supports.
extra parts for bottom whatever type you like and label to your likings Bed to the left or bed to the right switching position.