Dyson V6 HEPA Filter adapter
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
An adapter to use an V6 HEPA Filter for a budget version of the V6 without the exchangable HEPA Filter
- Ocena
- 0 / 5
- Polubienia
- 19
- Pobrania
- 109
- Wydruki
- 0
- Wyświetlenia
- 1593
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other House Equipment
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
The adapter is used to work with the original non-HEPA Filter Cap.
As seen in the pictures you need to cut off the end of the cap at the beginning of the venting slots.
After this you need to glue in the adapter. Since the adapter is NOT symetrical you need be careful to glue the small fins in the top position.
The glue you should use, should be a little gapfilling.
Print it with the inside down and with support, the material don't really matter. I printed it in a cheap PLA and it works now for 2 years, without a fail.