CRG Yamaha Bar End Adapter (MT-09)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
An adapter for CRG bar end mirrors for my Yamaha MT-09, but it should fit many bikes
- Ocena
- 0 / 5
- Polubienia
- 5
- Pobrania
- 27
- Wydruki
- 0
- Wyświetlenia
- 816
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Automotive
- Licencja
- Creative Commons — Attribution
Overview
This is an adapter for CRG bar end mirrors for my Yamaha MT-09, but it should fit all Yamahas with an M6 mounting bolt for the ends.
Printing
v1
Print out 4 of these, flat side down.
I suggest PETG or another filament that won't soften in heat or sunlight (I recommend against PLA)
v2
Print out 2 cores and 4 outer rings. They should be oriented so that everything is standing up. Support material will be required.
Again, I suggest PETG or similar.
The main changes are to hopefully minimize squish-- despite using PETG, the plastic still deformed under high mounting torque and high heat.
Installation
v1
- Clamp the mirrors on two halves
- Install with the stock M6 bolts
- ???
- Profit
v2
- Assemble two outer rings around one core, being sure to line up the notches
- Clamp mirror
- Install with the stock M6 bolts
- ???
- Profit
Despite having an additional step compared to v1, I have full confidence in your ability to assemble v2
Category: Automotive