Scoop protector for Valkyrie trucks(30-degree baseplate)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
It protects the rear baseplate of Valkyrie trucks. Works on 30 degree baseplates.
- Ocena
- 0 / 5
- Polubienia
- 2
- Pobrania
- 9
- Wydruki
- 0
- Wyświetlenia
- 62
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Outdoor Sports
- Licencja
- Creative Commons — Attribution — Share Alike
Because of the co-planer bushing geometry of Valkyrie trucks, the pivot part of the baseplates sticks out quite a bit. For those who use short race boards, the rear baseplate got damaged very easily. This is a very minimal scoop shaped cover to protect the 30-degree rear baseplate.
The riser adds 2.4mm to ride height. I make it as thin as possible, but most valk riders add a lot of risers to avoid wheelbite anyway. You can always add additional risers on top of this.
The scoop part has a hollow layer to absorb impact. This was inspired by Owen Campbell. I remember he demonstrated one like this for his don't trip. Yeah, definitely check out his youtube channel, very very informative.