PTS200Case
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is a remix of the PTS200 cases for new insert layout and sized to fit a 210mm build plate (e.g. Ender 3s)
- Ocena
- 0 / 5
- Polubienia
- 3
- Pobrania
- 42
- Wydruki
- 0
- Wyświetlenia
- 386
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Electronics
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
This is a rugged case for the PTS200 soldering iron.
It is designed so it fits a build plate that has at least 210mm in one direction (e.g. Ender 3 and their variants) no resizing is necessary.
Also it provides inserts that can include flux pen, two additional tip sponge (please see picture) etc…
The insert and the case can be printed in one place (PTS200Case-Combined.3mf) or separated and assembled. It is a tight fit in the latter case. Technically the base is compatible with other PTS200 inserts out there assuming they are not different height.
The 2 latches needed to be printed and should be reoriented on their side in the slicer.