Beefy Hinges for Voron 2020 Frame Door
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
These are beefy hinges for a 2020 frame door mod using 5mm x 16mm screws for attachment.
- Ocena
- 0 / 5
- Polubienia
- 19
- Pobrania
- 90
- Wydruki
- 0
- Wyświetlenia
- 828
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Voron Parts & Upgrades
- Licencja
- Creative Commons — Public Domain
This are beefy door hinges to attach a 2020 doomcube style fridge door. This is an improvement on my first design where I borrowed heavily from WhoppingPochards clicky clacky door hinges.
It is designed to use the following hardware based on hardware on hand. STEP files are included so they can be remixed to suit other hardware types:
- 5mm x 16mm Button head screws (8 required)
- 5mm pin x 43mm long (2 required)
- 5mm ID x 6.5mm OD x 10.1mm long bushing (4 required)
- Wierd I know, but it's what i had on hand
The key improvements made are:
- Use of 5mm bolts for stiffness.
- Designed to compress 3mm thick sealing foam to 2.3mm at the hinge side.
- Thickness all around increased for stiffness.
Recommended print settings:
- PETG, ABS, ASA, and CF filled variants
- 6+ walls and 6+ top/bottom layers
- 60% infill or greater
- 0.4-0.5 nozzle
Note that the bottom hinge has two round cylinder protrusions at the bolt holes that may need to be sanded down to clear the side panels. This was intended to ensure that the holes will print well with a few perimeters on that thin section.