Tamiya Arocs 3348 Tipper Liner
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
The tipper box "liner" is intended to protect the original Tamiya model plastic from the continual use and wear.
- Ocena
- 0 / 5
- Polubienia
- 2
- Pobrania
- 48
- Wydruki
- 0
- Wyświetlenia
- 210
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- RC & Robotics
- Licencja
- Creative Commons — Attribution — Noncommercial
Having spent the time and patience to build a fine functional model it offers some protection to the supplied box.
The liner is designed in 2 section in order to fi the print bed and easily fit the model.
Printed vertically the design fits my 220 x 220 bed and the length (height) fits within the 270 mm vert height.
the front section is printed vertically using supports below the front of the box with a skirt.
The front section overlaps the rear section to make a continuous box.
The rear section also printed vertically with the rear sitting on the bed using support and a brim. This allows the middle joint section to be printed fully and correctly enabling a good fit together in the truck, appears to be one continuous box when joined.
3D printing settings
Printed on my Ender 3 S1 Pro using e-Sun PLA, using generic settings, nozz temp 200, bed temp 60.
Designed with Autodesk Fusion