1 / 4
Pummeleinhorn mit Keks ; Fat Unicorn with Cookie — zdjęcie 1
1 / 4

Pummeleinhorn mit Keks ; Fat Unicorn with Cookie

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

A cute and a little bit fat unicorn with a cookie in its hands.

Ocena
5 / 5
Polubienia
62
Pobrania
393
Wydruki
7
Wyświetlenia
2032
Oceny
5

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Sculptures
Licencja
Creative Commons — Public Domain

Hey there,

Here is a fat unicorn with a nice cookie in its hands! 

The geometry was taken via 3D-scan and therefore has no rough edges, like the original product. (95 x 78 x 96 mm)

Make sure to use a layer height between 0.2 and 0.3 for the 0.4-0.6 mm nozzle. The black one in the picture was printed with a 0.6 nozzle and adaptive layers between 0.25 - 0.35 mm.

If the unicorn is too big for you, just scale it down like the orange one in my pictures. It prints perfectly even half the original height with a 0.4 mm nozzle and 0.2-0.24 mm layers.

Supports are only needed under the mouth, nowhere else! (Support distance 0 - 0.2 for better quality)

Have a successful print!

Print Settings

Scale: 100%

Nozzle: 0.6

Layer: 0.3

Infill: 20%

Supports: yes, touching buildplate under mouth, nowhere else

Support distance: 0.2 mm

 

Tagi