1 / 6
Magnetic detachable drill organizer for small drills
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A drill organizer that helps you stay calm when using small drills...
- Ocena
- 0 / 5
- Polubienia
- 25
- Pobrania
- 49
- Wydruki
- 0
- Wyświetlenia
- 472
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Organizers
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
SzczegółyPliki (2)Wydruki i komentarze (Wydruki: 0) (Komentarze: 0)Remiksy (0)Kolekcje (28)Powiązane
This is a drill organizer for small drills that magnetically detaches from its wall mount.
This allows you to keep track of the drills you have in use without having to answer those familiar questions over and over again:
“Was it 1.5 or 1.8 mm?” … "Where is my caliper...?"
;-)
I use neodymium magnets from old hard drives, but any magnet that fits into the inserts should work as well.
What you need:
- Super glue
- Screws for the wall mount (max. 3 mm diameter, 4x)
- Some magnets (max. thickness 3.3 mm)
Print settings:
- PLA
- 0.4mm nozzle
- 0.3mm layer height for the wall mount and drill organizer
- drillholder.3mf contains the wall mount and drill organizer in the correct orientation and layer height. Although it is possible to print both parts together, I suggest to printing one after the other. The drillholder has a support structure with 100% infill for the drill inserts.
- 0.2mm layer height for the top and front label. drillholder_label.3mf comes with preconfigured color change.
Assembling:
- Drill the drill inserts into the drill organizer. This will give the (very) small drills much better support.
- Insert the magnets into the wall mount and drill organizer
- Glue the front and top label in place.
- enjoy -