1 / 1
Ball Trapped in Cube (printing demo)
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
a demo of on-the-fly assembly of a build
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 9
- Wydruki
- 0
- Wyświetlenia
- 96
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Ideas
- Licencja
- Creative Commons — Attribution
Just a little demo of some things you can do to create otherwise “impossible” prints.
In this case, the cube and ball are printed with no support material, no glue or hardware, and no MMU.
To Recreate:
- print and assemble part #1, preferably using a different filament or material from parts #2 and #3
- print part #2
- slice part #3, adding a pause at 26.2mm
- start part #3 printing
- when the printer pauses, drop the ball (assembled part #1) inside, set part #2 into the recesses on part #3
- resume the print
The next layer of part #3 will fuse to and be supported by, part #2. When complete, the cube will be one contiguous piece with a ball trapped inside.
I think this technique, with a bit of creative anchoring, could be extended to create 90 degree overhangs or possibly even negative overhangs.