1 / 1
"Aqua Lily" foam floating mat bungee/tie down grommet — zdjęcie 1

"Aqua Lily" foam floating mat bungee/tie down grommet

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Grommet for attaching another tie down point onto a foam floating swim mat "Aqua Lily"

Ocena
0 / 5
Polubienia
3
Pobrania
35
Wydruki
0
Wyświetlenia
197
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Attribution — Noncommercial

I have a large foam floating swim mat at my lake cabin “Aqua Lily”. These come with a plastic grommet that has a bungee cord attached so you can connect it to the dock or tie it to an anchor to keep the mat in place. The grommet is on one end of the mat, however this allows the other side to float with the wind and waves. I wanted a way to tie down both ends of the mat however the company charges a silly amount to buy the grommet from them. Fusion to the rescue! 

Just use the grommet to trace the size of the hole you need to cut thru the mat and use a utility knife. Place each side of the grommet into each side and screw together. I also made a ball to terminate your bungee or rope which seats into the back side of the top cap. I used quick set epoxy to secure the ball to the end of the bungee. The other side of the top cap has a smooth chamfered opening so the bungee cord doesn't tear. I forgot to take a picture (I'll get one next spring when I open the cabin again) after install but it printed and went together perfectly.

Tagi