Supplemental Tool Holder for Felo Case
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This design fits within the Felo case to provide additional restraints; keeping the tools from falling out.
- Ocena
- 5 / 5
- Polubienia
- 1
- Pobrania
- 13
- Wydruki
- 1
- Wyświetlenia
- 106
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Tools
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Using the Felo tools caused the hard plastic case to wear. The tools would not stay in place once the case was closed. This design fits withing the case and adds additional restraints to keep the tools organized and in place. The FreeCAD model is parametric.
This model was printed with TPU and does not require any supports. To eliminate stringing, check “Avoid crossing perimeters” in the PrusaSlicer. If these are glued inside the case, make sure they are offset (as shown) or the case will not close.