Replacement Gear for replacing motor in Choueer Automatic Litterboxes

I had to replace the motor in my Choueer Choubox Litterbox after it failed.  I found these https://www.amazon.com/gp/product/B07F8WDFZV (NOT a sponsored link) which go a little slower than the stock ones, and appear to be compatible.  I did have to cut the wires from the old motor and solder them onto the new one since the new one doesn't have a connector on it.

The old gear will not be compatible with the new motor, so I designed my own.  Printed in PLA and has been in use regularly for about a year now with no issues.

I recommend turning off small gap repair features in your slicer--this will cause the print to slice with extra reinforcement for the spurs.

Legal Disclaimer:

The 3D design for a replacement part ("the Design") offered on this platform is provided free of charge for personal use only--and at your own risk. By downloading, printing, or using this Design, you agree to the following terms and conditions:

No Warranty: The Design is provided "as is" without any guarantees, warranties, or representations of any kind, either express or implied. The use of this Design is at your own risk. The creators of this Design make no claims regarding the suitability, durability, safety, or performance of the printed part in your specific application, including but not limited to its use in modifying an automatic litterbox.

Modification of Products: The Design is intended as a non-commercial, personal-use product to replace or modify parts in automatic litterboxes. Any modification to commercially available products, such as automatic litterboxes, may void warranties or violate manufacturer terms and conditions. The creators of this Design are not responsible for any such consequences.

Liability: The creators of the Design shall not be liable for any direct, indirect, incidental, special, or consequential damages, including but not limited to injury, damage to property, malfunction of equipment, or loss of data, arising from the use, misuse, or inability to use the Design or printed part, even if advised of the possibility of such damages.

User Responsibility: It is the user’s sole responsibility to ensure that the printed part is appropriate for their specific application and that its use does not create unsafe conditions. The creators of the Design strongly recommend testing the printed part in a non-critical environment before using it with an automatic litterbox or any other equipment.

Intellectual Property: The Design is offered for personal, non-commercial use only. You may not distribute, sell, or modify the Design for commercial purposes without prior written consent from the creators.

Compliance with Laws: Users are responsible for ensuring that their use of the Design complies with all applicable local, state, and federal laws and regulations.

By proceeding with the download, printing, or use of this Design, you agree to hold the creators harmless from any and all claims arising from its use.