Tweezer suitable for tick removal
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
After original tweezer has been broken, I have designed a new tweezer
- Ocena
- 0 / 5
- Polubienia
- 5
- Pobrania
- 31
- Wydruki
- 0
- Wyświetlenia
- 318
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Home Medical Tools
- Licencja
- Creative Commons — Attribution
It is recommended to use 0.25mm nozzle and 0,15mm layer height (maximum allowed for 0.25mm). Also do not forget to allow supports on the desk only. It appears that one layer raft is needed, otherwise supports does not work well for slightly heightened part. One tweezer part is 0,2mm higher.
And finaly it is necessary to use a file to sharpen claws. Even 0,25mm nozzle does not produce sharp claws.
If you have a resin printer, it would be easier to prefer it to create sharper claw.
NOTE: If you do not plan to use a spring in original design, the heightened layer makes no sense and easier printable design could be made.