Case for Sainsmart Huhushop Mega328 Transistor Diode Resistor Capacitor Inductor Tester
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is a case for the Sainsmart Huhushop Mega328 Tester/Meter. This case also contains a battery compartment and…
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 24
- Wydruki
- 1
- Wyświetlenia
- 287
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Electronics
- Licencja
- Creative Commons — Attribution — Noncommercial
This is a case for the Sainsmart Huhushop Mega328 Tester/Meter.
This case also contains a battery compartment and sliding panel for access to change the battery.
The tester itself will automatically determine the component attached to it and give specs. Will test Transistors, Diodes, Capacitors, Resistors and Inductors. Actually a pretty good tester.
The case does not expose the printed circuit pads for testing large transistors, but the connections are there on the ZIF socket so you can easily use wires or clip leads.
Instructions
Print this items as attached. You will need to drill 3 holes for the board and use 4-40 screws. I used regular screws, but nylon would work too.
Category: Electronics