NexGen3D: Magnetic Dock for the T114 ATAK Mobile Case
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
MAGNADOCK for the T114 ATAK Case
- Ocena
- 0 / 5
- Polubienia
- 25
- Pobrania
- 61
- Wydruki
- 0
- Wyświetlenia
- 1156
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Electronics
- Licencja
- Creative Commons — Attribution — Noncommercial
New version of this here: https://www.printables.com/model/1017019-nexgen3d-meshtastic-atak-heltec-t114-case-v2
I made this magnetic dock to suit this case: https://www.printables.com/model/1003402-nexgen3d-meshtastic-atak-heltec-t114-case
Real simple to print and build, requires the following:
- 2 x M3 8 to 12mm button or pan head bolts.
- 1 x Magnetic USB-C Adaptor → https://www.aliexpress.com/item/1005004891929312.html (You will need the one pictured)
- 2 x M3 Threaded Inserts
The magnetic couple will sit loose in the dock, this is by design as it self aligns when you drop the mobile tracker into it, I have also put some mounting holes in the bottom incase you want to screw it down to something, or have a stack of them on a panelt for charging many at the same time.
I print these in PC-CF as I will be using them in a 4x4 while in the outback, I recommend printing from at least ABS if you intend to do the same.