ERF Filament Cutter G2E EBB SB2209 USB
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Modification of the model SB_G2E_Front_Body_EBB for EBB SB2209 USB
- Ocena
- 5 / 5
- Polubienia
- 27
- Pobrania
- 142
- Wydruki
- 3
- Wyświetlenia
- 1579
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Voron Parts & Upgrades
- Licencja
- Creative Commons — Attribution
https://github.com/juliusjj25/G2E-Filametrix-Lever-Switch-Mod
Without supports. In one of the latest updates, Fusion 360 significantly reduced the model quality when exporting to STL (fewer polygons). Because of this, I now export from MESH one file at a time. You can load all three models into PrusaSlicer at once, and the supports will be in place. Or, you can manually add them as you see fit.
Dear friends, if you were as unlucky as I was (which is quite likely) and your pins don’t have good contact, here’s a very cheap solution—just solder in new pins. It’s inexpensive and permanently fixes the problem! https://www.aliexpress.com/item/4001122376295.html (2.54 2row femal gold)