1 / 2
Fosforeskující štítek pod vypínač světel / Illuminated label under the light switch — zdjęcie 1
1 / 2

Fosforeskující štítek pod vypínač světel / Illuminated label under the light switch

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Fosforeskující štítek pod vypínač světel / Illuminated label under the light switch

Ocena
0 / 5
Polubienia
1
Pobrania
34
Wydruki
0
Wyświetlenia
157
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Attribution — Noncommercial

Měnil jsem vypínač světel za nový, ale nový vypínač byl o něco menší než starý, a proto byla vidět na krajích díra pro kabely. Vytiskl jsem proto pod vypínač štítek, který by nepřesnost zakryl. Již jednou jsem použil svíticí filament Glow in the dark a proto jsem štítek opět vytiskl z tohoto filamnetu. Použil jsem filament Glow in the dark.

https://www.prusa3d.com/cs/produkt/fosforeskujici-pla-tiskova-struna-filament-1kg/

 

I replaced the light switch with a new one, but the new switch was a little smaller than the old one, so the cable hole was visible on the edges. I therefore printed a label under the switch to cover the inaccuracy. I have already used Glow in the dark filament once, so I printed the label again from this filament. I used Glow in the dark filament.

https://www.prusa3d.com/cs/produkt/fosforeskujici-pla-tiskova-struna-filament-1kg/

Tagi