Ender 3 v3 KE/SE Filament guide benchy
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A more interesting filament guide featuring our favorite mascot.
- Ocena
- 5 / 5
- Polubienia
- 91
- Pobrania
- 588
- Wydruki
- 2
- Wyświetlenia
- 3101
- Oceny
- 2
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Creality Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
If you move your spool to behind the screen on a SE/KE, you probably want a filament feed on the top of the right upright. And i wanted something more interesting than a little arm or something else.
So i made this. A benchy (with much less pollys so i wouldnt use this for benchmarking) with a cannon up front. Feed the filament in through the propeller area and out through the cannon.
I have it ontop of the anti shake construction mod and it needed some longer bolts. But it should fit fine with the stock setup and the same standard bolts.
Print with manual supports on the bottom of the cannon. But thats all it needs.
No other special instructions.
Works with a bit of ptfe tube too. but not required