Foil Track Nut Retention Sliders
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Print these to slide into your foilboard tracks to assemble it faster and consistently place the foil mast.
- Ocena
- 0 / 5
- Polubienia
- 11
- Pobrania
- 106
- Wydruki
- 0
- Wyświetlenia
- 726
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Outdoor Sports
- Licencja
- Creative Commons — Attribution — Noncommercial — NoDerivatives
These TPU retention sliders hold hydrofoil T nuts in your desired position between sessions. They speed up assembly and disassembly before and after foiling sessions. They are easy to install, and slide to reposition with a hex or torx key, or a M6 or smaller bolt. Just insert the tool into the hole in the block and push/pull it in the track to the desired position.
Printed in TPU, they rely on light press fit to stay in place, with one on either side of each track T nut.
Designed to print in place without supports. They're small, light and work great!