Hardware / Organization Trays
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Various smaller trays for hardware/sorting
- Ocena
- 5 / 5
- Polubienia
- 81
- Pobrania
- 289
- Wydruki
- 1
- Wyświetlenia
- 853
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Tools
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
This is a set of sorting trays I made for my maker space. I found myself needing small containers often and decided to design a few small trays. Exported from Fusion360 CAD in high resolution(smooth curves).
Internal curve is for smooth pulling of hardware from the edge.
All trays are 15mm tall.
Recesses in the bottom for 10mm rubber bumper feet to help avoid them moving.
I'm on my 4th pack of these from using over the years for builds and such. Very handy for stuff. https://www.amazon.com/gp/product/B00K6RZ9Q2/
Print at .15mm layer height or use variable layer height for .15 layers the first 4-5mm on the base to help improve overhang print quality.