PiKVM v3 ATX mounting bracket with M3 PCB mount holes
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Remix of ATX mounting bracket by pikvm.org with holes for M3 bolts matching the ATX breakout PCB.
- Ocena
- 0 / 5
- Polubienia
- 6
- Pobrania
- 44
- Wydruki
- 0
- Wyświetlenia
- 304
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Computers
- Licencja
- GNU General Public License v3.0
Motivation
After printing the original ATX mounting bracket found the clip-on mounts a bit flimsy, so besides drilling them out decided to make a remix for future needs.
Files
Files with suffix _source are the ones used to render the STL and the corresponding 3MF and GCODE. 3MF was used as source because the original STL needed fixing with PrusaSlicer, or else OpenSCAD failed to render.
Printing
PC (or PLA if case is cooled properly) recommended with 0.2mm layer height. Tried PETG and PA6/CF, but both lack stiffness.
Use supports for build plate only. Infill can be anything, since the bracket is pretty much solid anyway.
Printed using Prusament PC blend. No warping observed, no brim needed since pretty much on rafts anyway. Feel free to use my GCODE if you have MK3S+.
Extra Parts
To mount the PCB you'll need:
- 2 x M3x8 bolts with narrow head
- 2 x M3 nuts