1 / 5
hanging flower pots
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Living Room
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
- these pots are designed to act as a sleve for already potted plants (recomended basic plastic sleve the plants come in) due to degradation and leaking of printed parts it is not recomended to put the plants directly into the pot.
flat bottom pot is supportless. - round bottom pot needs suports and has a watering port, printing head down with supports inside is recomended.
- in the round bottom flower pot 3mf is included also separate tight fit plate for exces water. I recomend printing this from petg with extra perimeters to prevent water leaking onto the pot
- mounting plate has 4mm hole when scaling new hole is needed. plate with no hole for custom mounting will be added later.
prints in photos are made from Prusament PLA Pearl white, on Prusa MK4 with0,5mm nozle
mounting hw and plade are made from PETG