LED Light magnetic holder for intex above ground pool
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Magnetic mount for 8.5cm aliexpress pool/pond lights
- Ocena
- 0 / 5
- Polubienia
- 5
- Pobrania
- 14
- Wydruki
- 0
- Wyświetlenia
- 139
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Outdoor & Garden
- Licencja
- Creative Commons — Attribution
Magnetic mount for pool light to be used with Intex above ground pool.
I bought lights 8.5 cm diameter and the suction cups are not working in the intex above ground pool.
There is also magnet which can keep the light on metallic surface (like on fridge) but it is 4 small magnets which are not strong enough to keep the light in the pool with only piece of metal outside. Unfortunately, 4 magnets in the light are not installed in same direction so you cannot use 1 big magnet outside.
Model has 2 pcs. - holder mechanically locked in the light with magnet inside. 2nd part is magnet outside - can be used directly or in printed case.
Size of magnets: diameter 50mmx5mm
I printed in PETG, 04.mm nozzle, 0.2mm layer height, 4 perimeters, no supportds needed.
Not sure if it is waterproof nevertheless after 1 week no rusty signs on the holder.
Attached 3mf files has print pause in correct layer to allow insert a magnet in the print.
and step files to allow easier modifications.