Custom Soulear Charging Stand
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A modular approach to a custom charging stand/dock for the Soulear Ear Wax Removal Camera.
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 11
- Wydruki
- 0
- Wyświetlenia
- 51
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Gadgets
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
The Soulear ear wax removal camera I purchased online did not come with a cap nor a convenient stand.
This design offers both.
- Charging Stand
- Cap/cover
Requires the short USB charging cable that came with the device or a similar one of the same USB C adapter dimensions
I printed the white parts of the design using PETG, however, other filament materials should work too.
The grey spacer insert is printed in TPU. This can be printed in other filaments, but flexible/softer material like TPU is preferred to ensure the device does not shake or wobble when placed on the USB connector and moved around.
The spacer may be glued into place to prevent it from being pulled out with the device when the device is removed from the USB connector.
This is an initial design, it seems to work well for me, any constructive advice on how to improve it is welcomed.