1/10 Scale Action Figure E.V.A 01
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is a redesign of my previous model E.V.A that I created. It has been downscaled to 1/10 scale or 17cm tall, and a f
- Ocena
- 4,25 / 5
- Polubienia
- 743
- Pobrania
- 2104
- Wydruki
- 6
- Wyświetlenia
- 13 852
- Oceny
- 4
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Action Figures & Statues
- Licencja
- Creative Commons — Public Domain
Assembly Video :
https://youtu.be/a_FZUZAboug
Accesory Pack for A.D.A.M 01 and E.V.A 01 :
https://www.thingiverse.com/thing:6763700
This is a redesign of my previous model E.V.A that I created. It has been downscaled to 1/10 scale or 17cm tall, and a few sections of its articulation point have been adjusted.
The joints of this model are tightened with an M2x8mm nut bolt at each articulation point to improve durability. A total of 19 nut bolts are required to assemble this model.
reference for the nut bolt I use :
https://shopee.co.id/Baut-Ultra-Thin-Flat-Low-Head-M-2-Kepala-Rata-3-4-5-6-8-10-12-mm-Stainless-SUS304-M2-i.448878545.24223021074
my cura profile :
https://drive.google.com/file/d/140_u5kbcKD-86go10aEM3QwYArRR8tA7/view?usp=drive_link
*Note: this is only a suggestion with the setting I use on my Ender3V2. Please feel free to tinker for your best result.
Any feedback is appreciated, contact me if you have any Critic, Suggestions, or Issues regarding this model at:
[email protected]