Nerf SlingFire short dart conversion
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Fully printed drop in replacement for the bolt and barrel of a nerf slingfire.
- Ocena
- 5 / 5
- Polubienia
- 28
- Pobrania
- 96
- Wydruki
- 1
- Wyświetlenia
- 647
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Outdoor Toys
- Licencja
- Creative Commons — Attribution — Noncommercial
These are supposed to be fully printed, drop in replacement parts for the nerf slingfire.
Although I modelled these from scratch to match the slingfire's dimensions, they were heavily inspired on SomeDingus's Nerf Retaliator Brass Barrel Short Dart Conversion and on BanBot2's Extended Knockout Short Dart Barrel Mod.
The bolt replaces the original bolt (who would've guessed!) and the barrel replaces the dart gate thing.
The only extra hardware that is required is another 9,25x1,78mm o ring for the breech seal.
If your machine is well calibrated they should be pretty simple to install. Mine was a bit off, so I needed to do quite a bit of sanding to make the breech seal nicely.
I'm getting ~85fps on cut down accufakes. That's with a grey trigger spring and a 10mm spacer.
You are also gonna need a short dart magazine adapter to use this kit.
If you have any problems installing this, please let me know in the comments.
Updated on 21/01/2025 - Changed the barrel id to 13mm, now it fires consistently with the stock spring.