Sorting Base for Gridfinity with Gauge Holder
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This a 4 x 3 gridfinity base that holds standard 6 unit tall bins and a screw gauge that is 5 mm thick.
- Ocena
- 0 / 5
- Polubienia
- 8
- Pobrania
- 24
- Wydruki
- 0
- Wyświetlenia
- 286
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Organizers
- Licencja
- Creative Commons — Attribution — Share Alike
This a 4 x 3 gridfinity base/gauge holder that holds standard 6 unit tall bins and a screw gauge that is 5 mm thick. I use it with this imperial screw gauge and these gridfinity labeled lightweight bins. Allows one to use the gauge with out holding on to it to size the screws before placing the parts in the correct bin.
This base can be printed in PLA or any other filament. I printed mine using a 0.6 mm nozzle with a 0.32 mm layer height. Minimal infill and no supports are required. Print time was less than 4 hours and cost less than $4.00 US.