Eureka Mignon Magnifico grind settings dial for 2.0
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This ring fits directly on your stock dial to have a smooth experience dialing in the grinder.
- Ocena
- 5 / 5
- Polubienia
- 17
- Pobrania
- 240
- Wydruki
- 4
- Wyświetlenia
- 1338
- Oceny
- 3
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Kitchen
- Licencja
- Creative Commons — Attribution — Noncommercial
This ring fits directly on your stock dial like this ring for the first version.
The advantage is a smoother dialing experience since you dont have a 3D-printed thread.
to tighten up, i used a M3x6 screw, but it still sticks out. you can always cut a longer screw ;)
If you want, i could make a press fit version so no screw is needed - hole is 0.2mm oversized at the moment.
It is desigend to fit the version 2.0 of the Grindsize-dial.
My grinder (Magnifico) has a dial which is 22mm in diameter.
If you need, i can also modify it to fit other versions of the grinder, just ask in the comments.
as always i attached Fusion 360 Files if you want to mod yourself.